Bunnings Warehouse catalogue - 1 May - 30 Jun 2023 - NO LONGER VALID - page 58 *

thumbnail - Bunnings Warehouse mailer - 01.05.2023 - 30.06.2023 - Sales products - cabinet, gloves, curtain, power tools, drill driver kit, Ryobi, hacksaw, measuring tape, safety glasses, crate, curtain rod. Page 58.
58 / 117

* Valid at all Bunnings Warehouse stores

Show more

Products in this catalogue

 
Tools & materials nS  afety equipment (gloves, ear and eye protection) n Cloth n Tape measure and pencil n Drill with 3mm, driver and 16mm bits n Hacksaw n 40mm-thick FJ panel, cut to 40mm longer and 30mm wider than cabinet top• n 120- and 180-grit abrasive paper with sanding block n Timber oil n Upcycled or purposebuilt cabinet n 20mm x 20mm white round angle brackets n 8G x 20mm white button head screws n 16mm black curtain rod n Side-mount cabinet barn door track set n Upcycled or purpose-built door n 75mm x 32mm barrel bolt set with extra catch @lepallet_enterprise Keep in mind... n Always wear the recommended safety gear when using power tools, and work in a well-ventilated area. n The finished cabinet will be heavy, so enlist a second pair of hands to help move it into position. Scan the QR code Cabinet benchtop Viewing window Sliding door 1 On the hardwood panel, round over the edges and corners with 120-grit abrasive paper, then smooth all over with 180-grit. Seal with timber oil, applying and buffing with a cloth. Position the top on the cabinet with 20mm overhang at the sides and 30mm at the front. Secure to the inside frame using two brackets each corner, predrilling with a 3mm bit for 20mm button head screws. 2 Measure the height of the viewing window frame, add 20mm, then, wearing safety glasses, use a hacksaw to cut curtain rod into four pieces at this length. Use a 16mm bit to drill four evenly spaced holes 10mm into the base rail of the frame and 40mm into the top. To install the bars, slide the top ends up into the top holes to clear the base frame, then drop the bottom ends into the base holes. 3 To install the door hardware, follow the pack instructions to centre the rail of the door track set along the front, leaving the recommended clearance down from the top of the cabinet, then pre-drill with a 3mm bit to secure with supplied screws. Attach rollers and hang the door. Position the barrel bolt at the base of the door, with catches on the base rail at the centre and the end, securing with the supplied screws. 1 2 6 DIY TOOLKIT 4 5 3 Look how great Nala’s posh pad looks in situ: workshop.bunnings.com. au/luxury-dog-crate Read it! 58 bunnings.com.au | bunnings | 1 Rolltrack side mount cabinet barn door track set in Matt Black, $75, I/N: 0297022. 2 Taskmaster 75mm barrel bolt in Matt Black, $6.37, I/N: 0133190. 3 Carinya 20mm x 20mm x 15mm x 1.4mm round angle bracket in White, $3.51/pack of 12, I/N: 3962549. 4 Zenith 8G x 20mm button head screw in White, $9.05/pack of 100, I/N: 0249079. 5 Feast Watson kitchen timber oil, $28/250ml, I/N: 1520221. 6 Ryobi ONE+ 18V drill driver kit, $139, I/N: 0319598. 7 Pillar 16mm steel curtain rod in Black, $8.49/3m, I/N: 1284007. Some products are not available at all Bunnings stores, but may be ordered. bunnings | bunnings 7 Project editing Natasha Dickins. Some photographs feature products from suppliers other than Bunnings. •Timbers vary by state and territory; contact your local store for further information. LEFT Placing an extra catch in the centre means the door can be securely bolted open or closed

Other Bunnings Warehouse catalogues

Latest catalogues