PLAN IT DIY LOCK INSTALL
ABOVE For a new door, use the lock kit template
to drill using 54mm and 25mm holesaws. To
replace an older-style combination lock-
handle, check if you need an accessory cover
plate to overlay the original holes
Tools & materials
Safety equipment
(eye protection)
■ Phillips and
flathead
screwdrivers
Rubber wedges
■Small level
Mini long-nose
pliers
Hammer
ア
■ Chisel
■ Cleaning wipes
■Smart lock kit
with supplied
accessories
DIY TOOLKIT
Lacur
1 Trojan mini long nose plier, $6.48,
I/N: 0126910. 2 Adoored rubber door
wedge in White, $3.44/pack of 3,
I/N: 4061760. 3 Craftright 230mm magnetic
torpedo level, $2.99, I/N: 5660641.4 Lockly
'Vision' smart lock deadbolt with video
doorbell in Satin Nickel, $599, I/N: 0201412.
Some products are not available at all
Bunnings stores, but may be ordered.
HIGH-TECH UPGRADE
Update your front door with a new smart lock that allows entry with the tap
of a phone or the touch of a finger. A built-in video shows who's calling and
two-way audio lets you chat to them without even opening the door.
1 Remove the old lock and strike plate, clean
all over with wipes and wedge the door
open. Use a flathead screwdriver to extend
the deadbolt, position it in the door with the
slot facing upright and secure the plate
with supplied screws. Tip: Use a screwdriver
rather than a drill to avoid stripping.
3 For a left-swinging door, move the
sensor wire pad to the right-hand
channel with mini pliers. Hold the interior
assembly close to the door while clipping
the plug into the socket, then twist the
cable screws together and push the cable
under the eyelet hook.
5 Snap the door sensor to fit and position
the jamb sensor so they're no more than
20mm apart. Plug in the wi-fi hub and
register the lock in the app to activate the
warranty, following the prompts to set up
codes, fingerprint access, video capture
and to operate from a smartphone.
WE WILL
INSTALL
48 bunnings.com.au | bunnings | bunnings
You can also organise with
Bunnings to have your new
smart lock installed by a licensed
locksmith. Simply select a
compatible door lock in store,
grab an installation voucher then
head to the Special Orders Desk
to pay and arrange an install date.
FO
LOCGLY
2 Position the exterior assembly with the
vertical blade through the deadbolt.
Remove the adhesive backing and hold
a level against the lock to keep it straight
while pressing it onto the door. Attach
the mounting plate inside with the
supplied 60mm screws.
4 With the blade in the turn shaft, secure the
assembly using the supplied 12mm screws.
Add the supplied batteries and initiate a
self-check with the program button. Install
the strike plate in the jamb and check the
bolt opens smoothly, using a hammer and
chisel to adjust the recess if needed.
TOP LEFT Hume 'Linear XLR160' 2340mm x
1200mm x 40mm entrance door in Translucent
Glass, $2,036, 1/N: 0082451¹, painted in Taubmans
'Ultimate Enamel' semi gloss paint in Glowing
Bars, $60.90/1L, I/N: 0147149. Lane 620mm x
600mm x 40mm x 20mm square pull handle in
Black, $126, I/N: 4020909. Sansevieria plant
in Northcote Pottery 'Precinct Lite' 60cm trough
planter in White, , I/N: 2831988 (plant sold
separately). 114cm x 45cm PVC backed plain
outdoor coir mat in Natural, $15, I/N: 0198059.
All other products, stylist's own.
Keep in mind...
This particular smart lock requires connection
via the Lockly app for video functions to work with
a smartphone or device, and it's also compatible
with Google Assistant or Amazon Alexa. Check
that you have a suitable device and can install the
appropriate app before purchasing your smart lock.
online or at the Special Orders Desk. Paint colours may vary on application.
Project, photography
and styling Natasha Dickins. "Available to order
