Bunnings Warehouse catalogue - NO LONGER VALID - page 73 *

thumbnail - Bunnings Warehouse mailer - Sales products - cabinet, table leg, chair, battery, masking tape, paint, lamp, drill, Ryobi, measuring tape. Page 73.
73 / 85

* Valid at all Bunnings Warehouse stores

Show more

Products in this catalogue

 
73 DIY A DESK A work or study zone is a great asset to any home. As the MIH team showed, you can borrow space from a living zone to create a study nook - and even make a desk to suit your space! It's a relatively simple project, especially if you have the timber panel trimmed in store to the size you want. TOOLS & MATERIALS Safety equipment (mask, eye and ear protection) Tape measure and pencil Drill with driver and 3mm drill bits Masking tape 1200mm x 600mm x 18mm timber panel Four 700mm-high table legs 180-grit abrasive paper with sanding block This desktop has been left natural, but you can accentuate the grain using furniture oil I Cloth applied with a cloth With the best face of the panel facing down, Set up the drill with a 3mm bit, wrap tape Z15mm up from the tip to act as a depth Position a leg at each corner over the Sscrew hole marks and secure with the lat the corners, mark 15mm in from both edges. Use a leg as a template, positioning the plate between the marks to transfer the screw holes with a pencil. gauge and predrill the holes. Smooth all over both sides of the panels with 180-grit abrasive paper, then wipe away dust with a damp cloth. supplied screws. Your DIY toolkit Tips for creating a study nook - Find the right place Make sure you have plenty of room to spread out, that there's at least one power point nearby and adequate (but not glaring) natural light. - Sort storage To help keep the desktop clear, install storage perhaps wall shelving or a small cabinet under the desk. Style it up Personalise the space with meaningful but practical touches, such as a lamp for task lighting, an ergonomic chair, and a spot of potted greenery. RYOBI 3 1 Taskmaster 700mm x 50mm x 0.8mm steel table leg in Black, $9.49, I/N: 0064721. 2 SpecRite 1200mm x 600mm x 18mm hevea finger jointed panel, $40, I/N: 8330181°. 3 Ryobi 'ONE+' 18V drill driver, $99/skin only (battery not included), I/N: 0096074. O bunnings |O bunningsnz | bunnings.co.nz Paint colours may vary on application. *Timbers vary by region; contact your local store for further information.

Other Bunnings Warehouse catalogues

Latest catalogues